Cisco Catalyst 9130 Series Access Point

Four radios: 2.4 GHz (4x4), 5 GHz (8x8 and 4x4), Cisco RF ASIC, and BLE/IoT
Cisco Flexible Radio Assignment and Cisco CleanAir Technology
Internal and external antenna
WiFi 6 certified
Software: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or later
Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later
Catalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or later
Cisco IOS XE Software Release 17.1.1 s or later
Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities
4x4 MIMO with four spatial streams
Maximal Ratio Combining (MRC)
802.11n and 802.11a/g
20- and 40 MHz channels
PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
802.11 Dynamic Frequency Selection (DFS)
Cyclic Shift Diversity (CSD) support
802.11ac
8x8 downlink MU-MIMO with eight spatial streams
MRC
802.11ac beamforming
20-, 40-, 80-, and 160-MHz channels
PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz)
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
802.11 DFS
CSD support
WPA3 support
802.11ax
8x8 uplink/downlink MU-MIMO with eight spatial streams
Uplink/downlink OFDMA
TWT
BSS coloring
MRC
802.11ax beamforming
20-, 40-, 80-, and 160-MHz channels
PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
802.11 DFS
CSD support
WPA3 support
System memory: 2048 MB DRAM, 1024 MB flash
Interfaces
1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az
Management console port (RJ-45)
USB 2.0 at 4.5W (enabled via future software)
Dimensions (W x L x H)
Access point (without mounting brackets):
C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)
C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
Weight: Cisco Catalyst 9130AXI, 3.2 lb. (1.45 kg)
Cisco Catalyst 9130AXE, 3.78 lb. (1.71 kg)
Warranty: Limited lifetime hardware warranty

Detailed Specification

A PHP Error was encountered

Severity: Warning

Message: session_write_close(): Failed to write session data using user defined save handler. (session.save_path: /var/cpanel/php/sessions/ea-php81)

Filename: Unknown

Line Number: 0

Backtrace: