Operating System: Refer to the PERC RAID Card details for supported Operating Systems PERC H810Back-Panel Connectors :(A)SAS connectors (per EMM): 1 SAS (SFF 8088) "IN" connector for connection to the host 1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure(B) Serial connector (per EMM): 1 6-pin UART mini-DIN connector (for factory use only)ChassisHeight: 8.7cm (3.43 inches) Width: 48.2cm (18.98 inches) Depth: 54.1 (21.30 inches)Weight: 23.31 kg (51 lb) (maximum configuration)8.61 kg (19 lb) (empty)Connectivity :Support for the following configurations:(A)Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H810 (4 enclosures per port, single path)(B)Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H810 (4 enclosures connected to both ports via redundant path cabling)(C)Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 11 and a separate connectivity to drives 12 through 23Environmental Operating Conditions :(A)TemperatureOperating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hourStorage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hourSupports Fresh Air cooling, up to 35 degrees Celsius(B)Relative humidityOperating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hourStorage: 5% to 95% (non-condensing)(C)AltitudeOperating: -16 to 3048 m (-50 to 10,000 ft)Storage: -16 to 10,600 m (-50 to 35,000 ft)LED Indicators :(A)Front panel1 two-color LED indicator for system status2 single-color LED indicators for power and split mode(B)Hard-drive carrier1 single-color activity LED1 two-color LED status indicator per drive(C)EMM3 two-color LED status indicators: one for each of the EMM SAS ports and one for the EMM status1 single-color Unit Identification LED for each EMM(D)Power supply/cooling fan module3 LED status indicators for Power supply/cooling fan fault, AC power, and DC powerManagement : Enclosure Management Modules (EMM): 2 EMM modules provide redundant enclosure management capabilityPower : Two fully redundant power supplies; supports DC power(A)Wattage: AC - 600 W; DC - 700 W(B)Heat dissipation: AC - 2047 BTU/hr; DC - 2388 BTU/hr(C)Voltage: 100-240VAC; 48V DC(D)Frequency: 50/60Hz(E)Amperage: 8.6 A at 100 V, 4.3 A at 240 V(F)Available Hard Drive Power (per slot)Supported drive power consumption (continuous): up to 1.2 A at +5V up to 0.5 A +12VRAID : PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.See PERC H800 server compatability matrix for a list of currently supported serversStorage :(A)Drives:Up to twenty-four (24) 2.5-inch hot-pluggable SAS Hard Disk Drives (HDDs) at 7.2K, 10K, 15K rpm and SAS Solid State Drives (SSDs).(B)Drive performances and capacities(I)2.5” 6Gbps SAS:HDD 15K – 146GB, 300GB, 600GBHDD 10K – 300GB, 600GB, 900GB, 1.2GBHDD 10K 512e – 1.8TBHDD 7.2K – 500GB, 1TBSSD – 200GB, 800GB value SLC SSD – 400GB mainstream SLCSSD – 800GB RI MLC SSD – 200GB, 400GB WI SLCSSD – 2TB eMLC(II)2.5” 12Gbps SASHDD 15K – 600GB HDD 7.2K NL-SAS 512e – 2TB SSD – 200GB, 400GB, 800GB 1.6TB MU MLCSSD – 200GB, 400GB, 800GB WI MLCSSD – 800GB, 1.6TB RI MLC(C)Maximum Capacity (per enclosure)Up to 48TB when using 24 x 2TB NL-SAS 2.5" HDDs(D)Expansion CapabilitiesPERC H810 enables expansion to 8 enclosures, 4 per port

Operating System: Refer to RAID Card for details on supported Operating Systems PERC H810SAS connectors (per EMM): 1 SAS (SFF 8088) IN connector for connection to the host, 1 SAS (SFF 8088) OUT connector for expansion to an additional enclosureSerial connector (per EMM): 1 6 pin UART mini-DIN connector (for factory use only)Chassis Height : 8.7cm (3.43 inches) Chassis Width : 48.2cm (18.98 inches) Chassis Depth : 59.4 (23.39 inches)Chassis Weight : 28.39 kg (62.6 lb) (maximum configuration)8.84 kg (19.5 lb) (empty)SAS connectors (per EMM):  1 SAS (SFF 8088) IN connector for connection to the host, 1 SAS (SFF 8088) OUT connector for expansion to an additional enclosureSerial connector (per EMM):1 6-pin UART mini-DIN connector (for factory use only)Connectivity:(A)Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H810 (4 enclosures per port, single path)(B)Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H810 (4 enclosures connected to both ports via redundant path cabling)(C)Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.Environmental Operating Conditions:(A)Temperature:Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hourStorage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hourSupports Fresh Air cooling, up to 35 degrees Celsius(B)Relative humidity:Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hourStorage: 5% to 95% (non-condensing)(C)Altitude:Operating: -16 to 3048 m (-50 to 10,000 ft)Storage: -16 to 10,600 m (-50 to 35,000 ft)LED Indicators : (A)Front panel1 two-color LED indicator for system status2 single-color LED indicators for power and split mode(B)Drive carrier1 single-color activity LED1 two-color LED status indicator per drive(C)EMM3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status1 single-color Unit Identification LED for each EMM(D)Power supply/cooling fan module3 LED status indicators for power supply status, power supply/fan fault and AC statusManagement :2 Enclosure Management Modules(EMM) provide redundant enclosure management capabilityPower : Two fully redundant power supplies; supports DC powerWattage: AC - 600 W; DC – 700 WHeat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hrVoltage: 100-240 VAC, auto sensing; 48V DCFrequency: 50/60 HzAmperage: 8.6 A at 100 V, 4.3 A at 240 VAvailable Drive Power (per slot)Supported drive power consumption (continuous): up to 1.16 A at +5V up to 1.6 A +12VRAID : PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.Storage :(A)Drives :Up to twelve (12) hot-pluggable SAS Hard Disk Drives (HDDs) at 7.2K, 10K and 15K rpm and SAS Solid State Drives (SSDs)(B)Drive performances and capacities :(I)3.5” 6Gbps SAS:HDD 15K – 300GB, 450GB, 600GBHDD 7.2K – 1TB, 2TB, 3TB, 4TBHDD 7.2K NL-SAS 512e – 6TB(II)3.5” 12Gbps SAS:HDD 7.2K NL-SAS 512e – 6TB, 8TB, 10TB(III)2.5” 6Gbps SAS with 3.5” carrier:HDD 10K – 300GB, 600GB, 900GB, 1.2TB HDD 10K 512e– 1.8TBSSD – 400GB mainstream SLCSSD – 200GB, 800GB value SLC SSD – 800GB RI MLCSSD – 200GB, 400GB WI SLC(IV)2.5 12Gbps SAS with 3.5 carrier: 7.2K HDD NL-SAS 512e 2TB, SSD 200GB, 400GB, 800GB, 1.6TB MU MLCSSD – 200GB, 400GB, 800GB WI MLCSSD – 800GB, 1.6TB RI MLC(C)Maximum Capacity (per enclosure): Up to 120TB when using 12 x 10TB NL-SAS 3.5 HDDs (D)Expansion Capabilities: PERC H810 Host RAID adapter enables expansion to 8 enclosures (4 enclosures per port)

Chassis :(height x width x depth)177.8mm (7.0”) x 482.6mm (19.0”) x 825.5mm (32.5”)Connectivity :6Gb SASEnvironmental :Operating: -30.5m to 3000m (-100 ft to 9,840 ft)NOTE: For altitudes above 2950 ft, the maximum operating temperature is derated 1.8°F/1000 ft.Management :Server controller dependentPerformance :3.5" and 2.5" SAS, NL-SAS, SSD, SEDEMM :3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status1 single-color Unit Identification LED for each EMMManagement2 Enclosure Management Modules(EMM) provide redundant enclosure management capabilityRegulatory:Dell Inc. (Dell) is committed to compliance with the laws and regulations in each country into which the company ships our products. Dell products are designed and tested to meet the appropriate worldwide standards for Product Safety, Electromagnetic Compatibility, Ergonomics and other regulatory compulsory requirements, when used for their intended purpose.Expansion Capabilities :PERC H810 Host-RAID adapter enables expansion to 8 enclosures (4 enclosures per port)RAID :PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.

Chassis : 5U, 84 hot-pluggable 3.5 drive baysConnectivity : 6GB SASEnvironmental Operating Conditions :(A)TemperatureOperating: 10° t 35°C (50° to 95°F) with maximum temperature gradation of 20°C per hour Non-operating: -40° to 65°C (-40° to 149°F) at a maximum altitude of 12,000 m (39,370ft)(B)Relative humidity: Operating: 10% to 80% (non-condensing) with 29° C (82.4°F) maximum dewpoint. Non-operating: 5% to 95% (non-condensing) with 33°C (91°F) maximum dewpoint.(C)Altitude Operating: -16 to 3048 m (-50 to10,000 ft)Storage: -16 to 10,600 m (-50 to 35,000 ft)(D)Maximum Usable Capacity :Up to 1.3PB when using 2 enclosures, maximum of 168 8TB HDDsManagementServer dependentPowerWattage: 2800 AC onlyInput voltage range: 200-240 VACFrequency range: 50/60 HzRAID Controllers2 Enclosure Management Modules (EMM) provide redundant enclosure management capabilityScalabilityUp to 672TB when using 84 x 8TB NL-SAS 3.5" HDDsStorageDrive performance and capacity:3.5 NL-SAS 6Gb HDD (7.2K): 4TB, 6TB3.5 NL-SAS 4kn 6Gb HDD (7.2k): 6TB3.5 NL-SAS 512e 6Gb HDD (7.2K): 8TB

ConnectivityUnified mode (single path) for daisy chaining of up to 8 enclosures per PERC H830 or PERC H840 (4 enclosures per port, single path)Unified mode (recommended redundant path) for daisy chaining up to 4 enclosures per PERC H830 or PERC H840 (4 enclosures connected to both ports via redundant pathcabling)Connectivity per EMM4 mini-SAS HD connector for connection to the host or expansionService management:USB mini b connector (for factory use only)Dimensions & WeightHeight x width x depthMD1400: 8.7 cm (3.43") x 48.2 cm (18.98") x 59.2 cm (23.3") (depth includes PSU handle)MD1420: 8.7 cm (3.43") x 48.2 cm (18.98") x 53.9 cm (21.22") (depth includes PSU handle)Weight:24.2 kg (53.35 lb) (maximum configuration) 8.8 kg (19.4 lb) (empty)Environmental Operating Conditions(A)TemperatureOperating: 10° to 35°C (50° to 95°F) with maximum temperature gradation of 10°C per hour Storage: -40° to 65°C (-40° to 149°F) with temperature gradation of 20°C per hour(B)Relative Humidity:Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hourStorage: 5% to 95% (non-condensing)(C)Altitude:Operating: -16 to 3048 m (-50 to 10,000 ft)Storage: -16 to 10,600 m (-50 to 35,000 ft)Expansion Capacity PERC H830/H840 HBA enables expansion to 8 enclosures, PCIe 3.0, 12Gbps SAS, dual-port, 4 ports per enclosureManagementEnclosure Management Modules (EMM)2 EMM provide redundant enclosure management capabilityPowerWattage – also supports DC power: AC – 600W; DC – 700WHost heat dissipation: AC – 2047 BTU/hr; DC – 2388 BTU/hrInput voltage range: 100-240 VAC, auto-sensing; 48 V DCFrequency range:50/60 HzAmperage:8.6 A at 100 V, 4.3 A at 240 VSupported continuous consumption:Up to 1.2 A at +5VUp to 0.5 A at +12VRAIDRAID levels 0, 1, 5, 6, 10, 50 and 60Rack SupportDell ReadyRails II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racksStorageDrive type2.5" SAS, NL-SAS, SSD, SEDMaximum Raw Capacity (per enclosure)Up to 57.6TB when using 24 x 2.4TB NL-SAS2.5" HDDs

ConnectivityUnified mode (single path) for daisy chaining of up to 8 enclosures per PERC H830 or PERC H840 (4 enclosures per port, single path)Unified mode (recommended redundant path) for daisy chaining up to 4 enclosures per PERC H830 or PERC H840 (4 enclosures connected to both ports via redundant pathcabling)Connectivity per EMM:4 mini-SAS HD connector for connection to the host or expansionService management:USB mini b connector (for factory use only)Dimensions & WeightHeight x width x depth:MD1400: 8.7 cm (3.43") x 48.2 cm (18.98") x 59.2 cm (23.3") (depth includes PSU handle)MD1420: 8.7 cm (3.43") x 48.2 cm (18.98") x 53.9 cm (21.22") (depth includes PSU handle)Weight: 28.59 kg (63.03 lb) (maximum configuration)9.0 kg (19.8 lb ) (empty)Environmental Operating Conditions(A)TemperatureOperating: 10° to 35°C (50° to 95°F) with maximum temperature gradation of 10°C per hour Storage: -40° to 65°C (-40° to 149°F) with temperature gradation of 20°C per hour(B)Relative Humidity:Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hourStorage: 5% to 95% (non-condensing)(C)AltitudeOperating: -16 to 3048 m (-50 to 10,000 ft)Storage: -16 to 10,600 m (-50 to 35,000 ft)Expansion Capacity :PERC H830/H840 HBA enables expansion to 8 enclosures, PCIe 3.0, 12Gbps SAS, dual-port, 4 ports per enclosureManagementEnclosure Management Modules (EMM)2 EMM provide redundant enclosure management capabilityPowerWattage – also supports DC power: AC – 600W; DC – 700WHost heat dissipation: AC – 2047 BTU/hr; DC – 2388 BTU/hrInput voltage range: 100-240 VAC, auto-sensing; 48 V DCFrequency range:50/60 HzAmperage:8.6 A at 100 V, 4.3 A at 240 VSupported continuous consumption:Up to 1.2 A at +5VUp to 0.5 A at +12VRAIDRAID levels 0, 1, 5, 6, 10, 50 and 60Rack SupportDell ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racksStorage(A)Drive type3.5" and 2.5" SAS, NL-SAS, SSD, SED (2.5” available with adapter)(B)Maximum Raw Capacity (per enclosure)Up to 144TB when using 12 x 10TB NL-SAS 3.5" HDDs

Processor :Dell EMC NX3240, Single Intel® Xeon® Bronze 3104 1.7G, 16 GB Mem, Entry ConfigRAID :C12, RAID 5 for 4 or more HDDs or SSDs (Matching Type/Speed/Capacity)Hard Drive :600GB 10K RPM SAS 12Gbps 512n 2.5in Flex Bay Hard DriveNetwork Daughter Card :Broadcom 5720 QP 1Gb Network Daughter CardTransfer Rate and Backup Rate :LTO-8 drives: 1080GB/hr (Native)LTO-7 drives: 1080GB/hr (Native)LTO-6 drives: 576GB/hr (Native) Regulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the Environment

Chassis :Height: Rack Mount 133mm Width: Rack Mount 480mmDepth: Rack Mount 873mmWeight: 21Kg. with no drive and no mediaOrientation: Horizontal onlyLibrary Configurations :Up to 3 LTO half-height drives with 32 cartridge slots (ML3) or 40 cartridge slots (ML3E), 8Gb FC or 6Gb SASExpansion capacity :ML3 base ships standard with 32 cartridge slotsML3E expansion module ships standard with 40 cartridge slotsEach ML3 base supports up to six ML3E expansion modulesMedia :LTO-6, LTO-7, LTO-7 Type M, LTO-8Weight :130.1 kg (287 lb) (maximum configuration)62.1 kg (137 lb) (empty)Temperature :Operating: 10° to 35°C (50° to 95°F) with maximum temperature gradation of 20°C per hourNon-operating: -40° to 65°C (-40° to 149°F) at a maximum altitude of 12,000 m (39,370 ft)Power SuppliesOptional second power supply available for both ML3 and ML3E for redundancyRegulatory :Dell Inc. (Dell) is committed to compliance with the laws and regulations in each country into which the company ships our products. Dell products are designed and tested to meet the appropriate worldwide standards for Product Safety, Electromagnetic Compatibility, Ergonomics and other regulatory compulsory requirements, when used for their intended purpose. Scalability :Up to 384TB (native) for ML3 and 480TB (native) per ML3E3U up to 21U with addition of six ML3E (3U expansion modules)Software :RAID levels 0, 1, 5, 6, 10, 50 and 60

Media Types :LTO-8 DataCapacity (Native): 12TB*Capacity (2:5:1 Compressed): 30TBSpeed (Native): 300MB/sec native transfer rate per Half Height drive (1080GB/hr); 360MB/sec native transfer rate per Full Height drive (1296GB/hr)Encryption Support: YesWorm Support: NoLTO-8 Worm :Capacity (Native): 12TB*Capacity (2.5:1 Compressed): 30TBSpeed (Native): 300MB/sec native transfer rate per Half Height drive (1080GB/hr);360MB/sec native transfer rate per Full Height drive (1296GB/hr)Encryption Support: YesWorm Support: YesLTO-7 Type M :Capacity (Native): 9TB*Capacity (2.5:1 Compressed): 22.5TB*Speed (Native): 300MB/sec native transfer rate per drive (1080GB/hr)Encryption Support: Yes Worm Support: NoLTO-7 Data :Capacity (Native): 6TB*Capacity (2.5:1 Compressed): 15TBSpeed (Native): 300MB/sec native transfer rate per drive (1080GB/hr)Encryption Support: YesWorm Support: No LTO-7 Worm :Capacity (Native): 6TB*Capacity (2.5:1 Compressed): 15TBSpeed (Native): 300MB/sec native transfer rate per drive (1080GB/hr) Encryption Support: Yes Worm Support: YesLTO-6 Data :Capacity (Native): 2.5TB*Capacity (2.5:1 Compressed): 6.25TBSpeed (Native): 160MB/s (576GB/hr)Encryption Support: YesWorm Support: NoLTO-6 Worm :Capacity (Native): 2.5TB*Capacity (2.5:1 Compressed): 6.25TBSpeed (Native): 160MB/s (576GB/hr)Encryption Support: YesWorm Support: Yes

Chassis :Internal and External Drives AvailableInternal Drive :1.69" (h) x 5.83 (w) x 8.29" (d)Weight (3lbs 9 oz)External Drive :2.56"(h)x 8.74"(w) x 12.87"(d)Weight(9.7lbs)Drive Controllers :Serial Attached SCSI (SAS) at 6Gb/sSAS 6Gb HBA for 12th generation Dell PowerEdge serversSAS 12Gb HBA for 13th generation PowerEdge serversInternal Tape Adapter HBA for internal drives in 12th generation PowerEdge tower serversPERC H330 HBA for internal drives in 13th generation PowerEdge tower serversSoftware :For a list of supported tape backup software, refer to the Dell PowerVault Tape Compatibility MatrixTape Backup Technology :Native CapacityLTO-8 - 12TBLTO-7 Type M – 9TB1LTO-7 - 6TBLTO-6 - 2.5TBLTO-6, LTO-7 and LTO-8 drives support 2.5:1 compressionRegulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the Environment

Connectivity :Network interfaceADI T-10Ethernet RJ-45IPv6 Phase 1 & 2 Ready and DoD APLEncryption :Library-managed encryption is only available on LTO-6 and later generation TL1000 tape libraries.Library-managed encryption enabled PowerVault TL1000 tape libraries can be purchased at point of sale only. Library-managed encryption cannot be enabled on existing TL1000 tape libraries and the feature cannot be purchased after point of sale.Environmental Operating Conditions :Temperature50 to 100.4 degrees F, 10 to 38 degrees CHumidity (operating)20% to 80% RH (non-condensing)Chassis :1U form factorHeight: 44 mm (1.73 in)Width (chassis/bezel): 445 mm (17.52 in)/483 mm (19.02 in)Length: 850 mm (33.46 in)Weight: 13 kg (28.66 lb)Orientation: Horizontal onlyLibrary Configurations :Rack mount standardBarcode Reader :StandardRegulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the Environment

Chassis :Form Factor: 2U Rack MountHeight: 86.9 mm (3.42 inch)Width: 482.5 mm (19.00 inch)Depth: 480.7 mm (18.93 inch) including bezelWeight: 8.3 Kg (18.4 lbs)Drive Controllers :6Gb SAS HBA for PowerEdge 12th generation servers12Gb SAS for PowerEdge 13th generation serversSoftware :For a list of supported tape backup software, refer to the Dell PowerVault Tape Compatibility MatrixServer Compatibility :Dell™ and x86 IBM legacy, Lenovo and HP serversFor a complete list of servers, refer to the Dell PowerVault Transfer Rate and Backup Rate :LTO-8 drives: 1080GB/hr (Native)LTO-7 drives: 1080GB/hr (Native)LTO-6 drives: 576GB/hr (Native)

2TB Media :Capacity (Native): 2TBAverage sustained transfer rate: Internal SATA 35 MBps / External USB 80 MBpsBurst transfer rate: Internal SATA 1.5 Gbps / External USB 5 GbpsAverage access time (msec): 15Function: Removable disk driveLogical block size: 512 bytesSupport file system: ext2, ext3, FAT32 and NTFS (default)Unrecoverable error rate: 1 error per 10^14 bits read1TB Media :Capacity (Native): 1TBAverage sustained transfer rate: Internal SATA 35 MBps / External USB 80 MBpsBurst transfer rate: Internal SATA 1.5 Gbps / External USB 5 GbpsAverage access time (msec): 15Function: Removable disk driveLogical block size: 512 bytesSupport file system: ext2, ext3, FAT32 and NTFS (Default)Unrecoverable error rate: 1 error per 10^14 bits readRegulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the EnvironmentForm Factor: 5.25 inch internalHeight: 41.4 mm (1.63 inch)Width: 146.0 mm (5.75 inch)Depth: 171.9 mm (6.77 inch) including bezelWeight: 635 g (1.40 lbs)

Chassis format :All-in-one (dual controllers, internal drive bays, networking and expansion ports)Rack size :3UControllers :2 hot-swappable per chassis (active/active)Processors :Intel® Xeon® Processor E5-2630 v3, 2.4GHz, 8 coresInternal storage capacity :30 x 2.5” drive baysExpansion Capacity :Dell EMC SC420: 24 x 2.5” drive bays (12Gb SAS)Dell EMC SC400: 12 x 3.5” drive bays (12Gb SAS)Dell EMC SC460: 60 x 3.5” drive bays (12Gb SAS)Power :Power/wattage: 2 hot-swappable power supplies (1378W or 1485W options available, wattage type not interchangeable after point of sale)Maximum output power: 1378W supply option: 1378 W; 1485W supply option: 1485 W Maximum input power: 1378W supply option: 1584 W; 1485W supply option: 1688 WMaximum input current: 1378W supply option: 16 A, 1485W supply option: 8.8 A Maximum inrush current: 55A for 10 ms or less Nominal input voltage operating range: 1378W supply option: 100-240 VAC; 1485W supply option: 200-240 VACNominal input frequency: 50/60 HzMaximum thermal output/heat dissipation: 1378W option: 5,770 BTU per hour; 1485 option: 5,760 BTU per hour (for all-in-one base appliance, no expansion enclosures)Reporting/alerts :Support assist (phone home), remote diagnostics and performance monitoring, automated alerts, reports and notifications, departmental chargebackApplication Consistency :Replay Manager: Application-consistent snapshots in Microsoft or VMware environmentsAppSync: Application-consistent snapshots in Microsoft, VMware, Oracle environmentsExternal key manager support :Gemalto’s SafeNet KeySecure k460,SafeNet KeySecure k250,SafeNet KeySecure k150v Thales EMS 200

Processor :Dual 2.5GHz 8-core Intel® Xeon® processors per controllerOperating System :Storage Center 7.1 or higherChassis :Height: 13.33 cm (5.25 inches)Width: 44.5 cm (17.52 inches)Depth: 78.5 cm (30.9 inches)Weight: 24.22 kg (53.4 lb) (maximum configuration), 15.15 kg (33.4 lb) (empty)Rack support :ReadyRails™ II static rails for tool-less mounting in 4-postracks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racksConnectivity :SAS (6Gb ,12Gb)Drive Controllers :Dell SC400: 12 x 3.5" drive bays, 12Gb SASDell SC420: 24 x 2.5" drive bays, 12Gb SASDell SC460: 60 x 3.5” drive bays, 12Gb SASDell SC280: 84 x 3.5" drive bays, 6Gb SASDell SC200: 12 x 3.5” drive bays, 6Gb SASDell SC220: 24 x 2.5” drive bays, 6Gb SASEnergy Efficiency :The Dell EMC SC7020 arrays have earned the ENERGY STAR Data Center Storage designationConnectivity :SAS (6Gb ,12Gb)RAID :Supports RAID 0, 1, 5, 6, RAID 10 and RAID 10 DM (dual mirror). Any combination of RAID levels can exist on a single Storage Center. Multiple RAID levels can exist on the same storage tier within an array.

Chassis :Height: 2U/87.3 mm (3.44 inches)Width: 482.4 mm (18.98 inches) with rack latches; 444 mm (17.08 inches) without rack latchesDepth: 755.8 mm (29.75 inches) with bezelWeight: 19.73 kg (43.5 lb)Rack support :ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreadedround holes or tooled mounting in 4-post threaded-hole racksConnectivity :PCIe Gen 3 slots7 per controller4 full-height (cache card consumes one), 3 low-profileAny slot may be used for either front-end network or back-end expansion capacity connections Environmental Operating Conditions :Operating: 41º to 104ºF ( 5º to 40ºC ) Non-operating: -40º to 149ºF ( -40º to 65ºC )Management :Management interfaceBrowser-based (HTML 5)Unisphere for SC (element manager)Unisphere Central (multi-array management)CloudIQ (cloud-based analytics and monitoring)Power :Power/wattage: 2 hot-swappable 1100W 80 PLUS® Energy Star Platinum-certified power suppliesMaximum output power: 1100 W Maximum input power: 1200 WMaximum input current: 12 A Maximum inrush current: 25A for 10 ms or lessNominal input voltage operating range: 100-240 VACNominal input frequency: 50/60 HzMaximum thermal output/heat dissipation: 4,760 BTU perEnergy Efficiency :The Dell EMC SC7020 arrays have earned the ENERGY STAR Data Center Storage designationStorage :Block (SAN)*Expansion enclosures :Mix and match from the following options:Dell SC400: 12 x 3.5" drive bays, 12Gb SASDell SC420: 24 x 2.5" drive bays, 12Gb SASDell SC460: 60 x 3.5” drive bays, 12Gb SASDell SC280: 84 x 3.5" drive bays, 6Gb SAS*Dell SC200: 12 x 3.5” drive bays, 6Gb SAS*Dell SC220: 24 x 2.5” drive bays, 6Gb SAS*

Chassis :Unless otherwise indicated, specifications apply to both SC7020F and SC5020F array models.Rack size :3UProcessors per controller :SC7020F: Dual Intel® Xeon® Processors, E5-2628 v3 2.5GHz, 8 coresSC5020F: Single Intel® Xeon® Processor E5-2630 v3, 2.4GHz, 8 coresOperating system :Dell Storage Center OS (SC OS) 7.2 or greaterExpansion Capacity :Dell EMC SC420F: 24 x 2.5” drive bays (12Gb SAS)Regulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the EnvironmentPower:SC7020F: 2 hot-swappable 1485W power suppliesSC5020F: 2 hot-swappable power supplies (1378W or 1485W options available, wattage type not interchangeableafter point of sale)

Storage Controller :Dual controllers with 16GB non-volatile memory (8GB per controller)with up to 32GB non-volatile memory in a group of 2 arraysInterface ports :Two 10GBASE-T with RJ45 or 2 x 10GbE SFP+ for fibre or twin-ax copper cablingSnapshots :128 per volume / up to 2,048 total per groupOperating systems and hypervisors :Microsoft® Windows Server® including Hyper-V®VMware® ESX ServerRed Hat® Enterprise Linux® (RHEL)SUSE® Enterprise Linux® (SLES)Oracle® LinuxCitrix® XenServer®Management Interfaces :Dell Storage Manager (DSM): Allows you to perform day-to-day tasks across SC and PS Seriesarrays from a single management interface PS Series Group ManagerSAN Headquarters multi-group performance and event monitoring toolSerial consoleAbility to configure a separate management networkSNMP, telnet, SSH, HTTP, Web (SSL), host scriptingMulti-administrator supportSecurity :CHAP authenticationAccess control for iSCSIAccess control for management interfaces including RADIUS supportCommon Criteria Certification with FW 7.1.1Environmental Operating Conditions :Temperature range: 5° to 40°C (41° to 104°F)Storage temperature: –40° to 65°C (–40° to 149°F)Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hourOperational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations onlyOperating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientationsAcoustics Category 4:bels at 23C +/- 2CAir Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985Physical :Height: 2U/8.68 cm (3.41 in)Width: 44.63 cm (17.57 in)Depth: 59.4 cm (23.4 in)Weight: 29.2 Kg (64.4 lb)Regulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the Environment

Enclosure Monitoring System :Automatic spare configuration and utilizationEnergy Efficiency :The Dell PS6210 series arrays have earned the ENERGY STAR Data Center Storage designation.Management :Dell Storage Manager (DSM): Allows you to perform day-to-day tasks across SC and PS Series arrays from a single management interfacePower :50/60 HzRack Support :ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racksReliability :Redundant hot-swappable controllers with vertical port sharing Hot-swappable disks and power suppliesEnvironmental Operating Conditions :Temperature range: 5° to 40°C (41° to 104°F)Storage temperature: –40° to 65°C (–40° to 149°F)Altitude: For altitudes above 2950 feet, the maximum operating temperature is derated 1ºF/550 ft.Operating Relative humidity: 20% to 80% (noncondensing) with a maximum humidity gradation of 10% per hourOperational shock: Half-sine shock 31G +/- 5% with a pulse duration of 2.6ms +/- 10% in operational orientations onlyOperating Vibration: 0.26 Grms (5 to 350 Hz) for 5 minutes in operational orientationsAcoustics Category 4:bels at 23C +/- 2CAir Quality: Airborne contaminant level of G1 or lower as defined by ISA-S71.04-1985Physical :Height: 2U/8.68 cm (3.41 in)Width: 44.63 cm (17.57 in)Depth: 59.4 cm (23.4 in)Weight: 29.2 Kg (64.4 lb)Regulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the Environment

Product configurations :Provides affordable, high-capacitystorage for data-intensive workloadssuch as archival/secondary storage.Storage controllers :Dual controllers with 32GB non-volatile memory per controllerNetwork interfaces :10GbE connectivity;management network: 1 x 100BASE-TX per controller;interface ports: 2 x 10GBASE-T with RJ45 or 2 x 10GbESFP+ for fibre or twin-ax copper cablingReliabilityRedundant hot-swappable controllers; hot-swappable disks and power suppliesEnclosure monitoring system :Automatic spare configuration and utilization, SMART,Automatic bad block replacement,Auto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drivesManagement interfaces :DSM for day-to-day tasks across SC Series and PS Series arrays from a single management interface; PS Series Group Manager;SAN Headquarters multi-group performance and event monitoring tool; Serial console; Ability to configure a separate management network;SNMP, telnet, SSH, HTTP, Web (SSL), host scripting; Multi-administrator supportSecurity :CHAP authentication; Access control lists and policies for iSCSI;Access control for management interfaces including Active Directory,LDAP or RADIUS supportPhysical :Height: 5U/22.23 cm (8.8 in), Width: 48.26 cm (19 in), Depth: 91.44 cm (36 in), Weight: 130.7 kg (287.5 lb) (max config)Power :Dual 2800W, 200-240VAC, 50/60Hz (high AC line power source only)

Reliability :Redundant hot-swappable controllers and hot-swappable disks, redundant network path via internal fabric wiring in M1000e chassis, redundant fans and power supplies provided by M1000e chassisEnclosure Monitoring System :Automatic spare configuration and utilizationSMARTAutomatic bad block replacementAuto-Stat Disk Monitoring System (ADMS) to monitor health of data on disk drivesManagement :Dell Chassis Management Console (CMC) integrationDell Storage Manager (DSM): Allows you to perform day-to-day tasks across SC and PS Series arrays from a single management interfacePS Series Group ManagerPS Series SAN Headquarters multigroup performance and event monitoring toolSerial consoleAbility to configure a separate management networkSNMP, telnet, SSH, HTTP, web (SSL), host scriptingMultiadministrator supportSecurity :CHAP authenticationAccess control for iSCSIAccess control for management interfaces including RADIUS supportIPSECSEDCommon Criteria Certification with FW 7.1.1Management Interfaces :Dell Storage Manager (DSM): Allows you to perform day-to-day tasks across SC and PS Seriesarrays from a single management interface PS Series Group ManagerSAN Headquarters multi-group performance and event monitoring toolSerial consoleAbility to configure a separate management networkSNMP, telnet, SSH, HTTP, Web (SSL), host scriptingMulti-administrator supportSecurity :CHAP authenticationAccess control for iSCSIAccess control for management interfaces including RADIUS supportCommon Criteria Certification with FW 7.1.1Regulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the EnvironmentPhysical :Height: 2U/8.68 cm (3.41 in)Width: 44.63 cm (17.57 in)Depth: 59.4 cm (23.4 in)Weight: 29.2 Kg (64.4 lb)

Processor : Dell EMC NX3240, Single Intel® Xeon® Bronze 3204 1.9G, 16GB Mem, Entry ConfigRAID : C12, RAID 5 for 4 or more HDDs or SSDs (Matching Type/Speed/Capacity)Hard Drive : 600GB 10K RPM SAS 12Gbps 512n 2.5in Flex Bay Hard Drive, 3.5in HYB CARRHard Drives (Front Bay) : 2TB 7.2K RPM SATA 6Gbps 512n 3.5in Hot-plug Hard DrivePower Supply : Single, Hot-plug Power Supply (1+0), 750WPower Cords : NEMA 5-15P to C13 Wall Plug, 125 Volt, 15 AMP, 10 Feet (3m), Power Cord, North AmericaNetwork Daughter Card : Broadcom 5720 Quad Port 1GbE BASE-T, rNDCEmbedded Systems Management : iDRAC9,EnterpriseTrusted Platform Module : No Trusted Platform ModuleRack Rails : No Rack Rails or Cable Management ArmExternal Optical Drive : NoneWarranty Basic Service : 3 Years Basic Hardware Warranty Repair: 5x10 HW-Only, 5x10 NBD Onsite

Processor : Dell EMC NX3240, Single Intel® Xeon® Bronze 3204 1.9G, 16GB Mem, Entry ConfigRAID : C12, RAID 5 for 4 or more HDDs or SSDs (Matching Type/Speed/Capacity)Hard Drive : 600GB 10K RPM SAS 12Gbps 512n 2.5in Flex Bay Hard Drive, 3.5in HYB CARRHard Drives (Front Bay) : 2TB 7.2K RPM SATA 6Gbps 512n 3.5in Hot-plug Hard DrivePower Supply : Single, Hot-plug Power Supply (1+0), 750WPower Cords : NEMA 5-15P to C13 Wall Plug, 125 Volt, 15 AMP, 10 Feet (3m), Power Cord, North AmericaNetwork Daughter Card : Broadcom 5720 Quad Port 1GbE BASE-T, rNDCEmbedded Systems Management : iDRAC9,EnterpriseTrusted Platform Module : No Trusted Platform ModuleRack Rails : No Rack Rails or Cable Management ArmExternal Optical Drive : NoneWarranty Basic Service : 3 Years Basic Hardware Warranty Repair: 5x10 HW-Only, 5x10 NBD Onsite

Chassis :RD1000 Internal Devices :Form Factor: 5.25 inch internalHeight: 41.4 mm (1.63 inch)Width: 146.0 mm (5.75 inch)Depth: 171.9 mm (6.77 inch) including bezelWeight: 635 g (1.40 lbs)Form Factor: 3.5 inch internalHeight: 41.4 mm (1.63 inch)Width: 101.6 mm (4.00 inch)Depth: 159.4 mm (6.28 inch) including bezelWeight: 408 g (0.90 lbs)RD1000 Media :Form Factor: Removable CartridgeHeight: 23.68 mm (0.93 inch)Width: 86.6 mm (3.4 inch)Depth: 119.18 mm (4.69 inch)Weight: 173 g (0.38 lbs)Environmental Operating Conditions :Temperature :Operational: 10 to 40°CNon-Operational: -40 to 65°CThermal Gradient :Operational: 10°C/hourNon-Operational: 20°C/hourRelative Humidity :Operational: 20 to 80%, non-condensingNon-Operational: 10 to 90%, non-condensingMaximum Wet Bulb TemperatureOperational: 29°C, non-condensingNon-Operational: 38°C, non-condensingAltitudeOperational: -50 ft to 10,000 ftNon-Operational: -50 ft to 35,000 ftVibrationOperational: sine vib 0.25G peak, 3-200 HzNon-Operational: random vib 1.54G RMSShockOperational: half sine 31G 2.6msNon-Operational: half sine 71G 2 msMedia :RD1000 Media Technical Specifications:2TB Media :Capacity (Native): 2TBAverage sustained transfer rate: Internal SATA 30 MBps / External USB3.0 80 MBpsBurst transfer rate: Internal SATA 1.5 Gbps / External USB3.0 5 GbpsAverage access time (msec): 15Function: Removable disk driveLogical block size: 512 bytesSupport file system: ext2, ext3, FAT32 and NTFS (Default)Unrecoverable error rate: 1 error per 10^14 bits readMTBF Internal USB Device: 550,000 hours 1TB Media :Capacity (Native): 1TBAverage sustained transfer rate: Internal SATA 30 MB/s / External USB 3.0 80 MB/sBurst transfer rate: Internal SATA 1.5 Gbps / External USB 3.0 5 GbpsAverage access time (msec): 15Function: Removable disk driveLogical block size: 512 bytesSupport file system: ext2, ext3, FAT32 and NTFS (Default)Unrecoverable error rate: 1 error per 10^14 bits readMTBF Internal USB Device: 550,000 hoursMedia Types : RD1000Power : Internal RD1000 DevicesVoltage Tolerance: +5VDC ±5%, +12VDC ±10%Amperage Rating: 1.8A, 0.005ARegulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the EnvironmentReliability :Unrecoverable error rate: 1 error per 10^14 bits readMTBF Internal USB Device: 550,000 hoursSoftware :Retrospect backup softwareServer Compatibility :Dell and x86 IBM legacy, Lenovo and HP servers For a complete list of servers, refer to the Dell PowerVault Tape Storage : With two RD1000 removable media: up to 4TB (native)