Three radios: 2.4GHz (4x4), 5GHz (4x4), and BLE, Supports OFDMA and MU-MIMO, Internal and external antennaSoftware: Cisco Unified Wireless Network Software Release 8.9 or laterCisco IOS XE Software Release 16.11 or laterSupported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless ControllersCisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller802.11n version 2.0 (and related) capabilities4x4 MIMO with four spatial streamsMaximal Ratio Combining (MRC)802.11n and 802.11a/g beamforming20- and 40-MHz channelsPHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 Dynamic Frequency Selection (DFS)Cyclic Shift Diversity (CSD) support802.11ac4x4 downlink MU-MIMO with four spatial streamsMRC802.11ac beamforming20-, 40-, 80-, and 160-MHz channelsPHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 DFSCSD support802.11ax4x4 downlink MU-MIMO with four spatial streamsUplink/downlink OFDMATWTBSS coloringMRC802.11ax beamforming20-, 40-, 80-, and 160-MHz channelsPHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 DFSCSD supportIntegrated antenna: 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuthExternal antenna (sold separately)Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenariosInterfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bzManagement console port (RJ-45), USB 2.0 (enabled via future software)Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errorsDimensions (W x L x H)Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)Weight: Cisco Catalyst 9115AXI, 1.98 lb (0.9 kg)Cisco Catalyst 9115AXE, 2.43 lb (1.1 kg)System memory: 2048 MB DRAM, 1024 MB flashWarranty: Limited lifetime hardware warranty

Four radios: 2.4 GHz (4x4), 5 GHz (4x4), Cisco RF ASIC and BLE/IoTCisco Flexible Radio Assignment and Cisco CleanAir TechnologyInternal and external antennaSoftwareCisco Unified Wireless Network Software Release 8.9.x or laterCisco IOS XE Software Release 16.11 with AP Device Pack, or laterSupported wireless LAN controllersCisco Catalyst 9800 Series Wireless ControllersCisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller802.11n version 2.0 (and related) capabilities4x4 MIMO with four spatial streamsMaximal Ratio Combining (MRC)802.11n and 802.11a/g beamforming20- and 40-MHz channelsPHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 Dynamic Frequency Selection (DFS)Cyclic Shift Diversity (CSD) support802.11ac4x4 downlink MU-MIMO with four spatial streamsMRC802.11ac beamforming20-, 40-, 80-, and 160-MHz channelsPHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 DFSCSD support802.11ax4x4 downlink MU-MIMO with four spatial streamsUplink/downlink OFDMATWTBSS coloringMRC802.11ax beamforming20-, 40-, 80-, and 160-MHz channelsPHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 DFSCSD supportInterfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)IEEE 802.3bzManagement console port (RJ-45), USB 2.0 3.75W (enabled via future software)Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errorsDimensions (W x L x H)Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7 (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0 (21.6 x 21.6 x 5.1 cm)Weight: Cisco Catalyst 9120I, 2.87 lbs (1.3 kg)Cisco Catalyst 9120E/P, 3 lbs (1.36 kg)System memory: 2048 MB DRAM, 1024 MB flashWarranty: Limited lifetime hardware warranty

Three radios: 2.4GHz (4x4), 5GHz (8x8), and BLE, Supports OFDMA and MU-MIMO, Internal antennaSoftware: Cisco Unified Wireless Network Software Release 8.9 or laterCisco IOS XE Software Release 16.11 or laterSupported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless ControllersCisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller802.11n version 2.0 (and related) capabilities8x8 MIMO with four spatial streams for 5 GHz band4x4 MIMO with four spatial streams for 2.4 GHz bandMaximal Ratio Combining (MRC)20- and 40-MHz channelsPHY data rates up to 600 Mbps (40 MHz with 5 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)Cyclic Shift Diversity (CSD) support802.11ac8x8 downlink MU-MIMO with eight spatial streamsMRC802.11ac beamforming20-, 40-, 80, and 160 MHz channelsPHY data rates up to 3.5 Gbps at 5 GHzPacket aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)CSD support160 MHz support only on 4 spatial stream802.11ax8x8 MIMO with eight spatial streams for 5-GHz band4x4 MIMO with four spatial streams for 2.4-GHz bandDownlink OFDMATWTMRC802.11ax beamforming20-, 40-, 80, and 160 MHz channelsPHY data rates up to 5 Gbps at 5 GHzPacket aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)CSD supportIntegrated antenna: 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuthInterfaces: 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45)IEEE 802.3bzManagement console port (RJ-45)USB 2.0 with up to 4.5W (enabled via future software)Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errorsDimensions (W x L x H)Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)Weight: 3.02 lb (1.4 kg)System memory: 2048 MB DRAM, 1024 MB flashWarranty: Limited lifetime hardware warranty

Four radios: 2.4 GHz (4x4), 5 GHz (8x8 and 4x4), Cisco RF ASIC, and BLE/IoTCisco Flexible Radio Assignment and Cisco CleanAir TechnologyInternal and external antennaWiFi 6 certifiedSoftware: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or laterCisco IOS XE Software Release 16.12.1 with AP Device Pack, or laterCatalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or laterCisco IOS XE Software Release 17.1.1 s or laterSupported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless ControllersCisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller802.11n version 2.0 (and related) capabilities4x4 MIMO with four spatial streamsMaximal Ratio Combining (MRC)802.11n and 802.11a/g20- and 40 MHz channelsPHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)802.11 Dynamic Frequency Selection (DFS)Cyclic Shift Diversity (CSD) support802.11ac8x8 downlink MU-MIMO with eight spatial streamsMRC802.11ac beamforming20-, 40-, 80-, and 160-MHz channelsPHY data rates up to 6.9 Gbps (160 MHz with 5 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 DFSCSD supportWPA3 support802.11ax8x8 uplink/downlink MU-MIMO with eight spatial streamsUplink/downlink OFDMATWTBSS coloringMRC802.11ax beamforming20-, 40-, 80-, and 160-MHz channelsPHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)802.11 DFSCSD supportWPA3 supportSystem memory: 2048 MB DRAM, 1024 MB flashInterfaces1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3azManagement console port (RJ-45)USB 2.0 at 4.5W (enabled via future software)Dimensions (W x L x H)Access point (without mounting brackets):C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)Weight: Cisco Catalyst 9130AXI, 3.2 lb. (1.45 kg)Cisco Catalyst 9130AXE, 3.78 lb. (1.71 kg)Warranty: Limited lifetime hardware warranty

Industrial  outdoor 802.11ac wireless.Designed and certified for extreme environments.Rail - rolling stock  shock and vibration certified.Chipset with best-in-class RF architecture.SoftwareCisco Unified Wireless Network Software Release with AireOS Wireless Controllers:8.0.120.0 or later for the Cisco IW3700 Series Access PointCisco IOS Software Release 15.3(3)JA5 or later for the Cisco IW3700 Series Access Point802.11ac Wave 1 capabilities  4 x 4 MIMO with 3 spatial streams  Maximal-Ratio Combining (MRC)  802.11ac beamforming  20- 40- and 80-MHz channels  PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz)  Packet aggregation: A-MPDU (Tx/Rx) A-MSDU (Tx/Rx)  802.11 Dynamic Frequency Selection (DFS)  Cyclic Shift Diversity (CSD) support802.11n version 2.0 (and related) capabilities4 x 4 MIMO with 3 spatial streams  Maximal-Ratio Combining (MRC) 802.11n and 802.11a/g beamforming  20- and 40-MHz channels PHY data rates up to 450 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx) A-MSDU (Tx/Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) supportData rates supported802.11a: 6  9  12  18  24  36  48  and 54 Mbps802.11g: 1  2  5.5  6  9  11  12  18  24  36  48  and 54 MbpsInterfaces 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2) PoE In (802.3af) PoE+ In (802.3at) 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2) PoE Out (802.3af) Management console port (serial with RJ-45 connector)Indicators Status LED indicates boot loader status  association status  operating status  boot loader warnings  boot loader errorsSystem memory 512 MB DRAM 64 MB flashDimensions (W x L x H) Access point (not including connectors): 11.3 x 8.0 x 2.3 in (28.7 x 20.3 x 5.9 cm) Volume: 148 cubic inches (2.4 liters)Weight  6.7 lb (3.0 kg)Warranty5-year limited hardware warranty

Embed resilient Cisco WiFi into your hardware.Extend intent-based networking to your solutions .IOx support for intelligence at the edge.Cisco DNA Assurance for worry-free network management.Radio type2.4 GHz: 802.11b/g/n  2x2 MIMO  2 spatial streams5 GHz: 802.11a/n/ac  2x2 MIMO  2 spatial streams802.11ac Wave 2 capabilities 2x2 MIMO with two spatial streams  Multi- and single-user MIMO  Maximal-Ratio Combining (MRC)  802.11ac beamforming (transmit beamforming)  20- 40- and 80-MHz channels  PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)  802.11 Dynamic Frequency Selection (DFS)  Cyclic Shift Diversity (CSD) support802.11n Version 2.0 (and related) capabilities  2x2 MIMO with two spatial streams  Maximal-Ratio Combining (MRC)  20- and 40-MHz channels  PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)  802.11 Dynamic Frequency Selection (DFS) Cyclic Shift Diversity (CSD) supportData rates supported2.4-GHz radio:802.11b: 1  2  5.5  11 Mbps802.11g: 6  9  12  18  24  36  48  54 Mbps802.11n data rates:Interfaces x1 10/100/1000BASE-T auto-sensing PoE+ in (802.3at)Cisco Universal Power over Ethernet (UPOE) in  x2 10/100/1000BASE-T auto-sensing PoE out (802.3af) PoE+ out (802.3at)  x1 fiber SFP (fiber or electrical)  Management console port (RJ-45)  USB 3.0 port  Multicolor system LED  port LED  DC power input  Reset buttonUplink optionsEthernet  SFP  and wireless meshAntennas :Dual bandPoE output : 35.3 W totalMaximum 30W per PSE portUSB interface USB 2.0 / USB 3.0 supportedDimensions (H x W x L)8.5 in. x 7.55 in. x 1.9 in.Weight3.1 lbs.Warranty1 year

Designed for Class I Division 2 hazardous locationsIntelligence with intent-based networking to the IoT Edge and IOx supportPartner IoT modules for WirelessHART  ISA100Cisco DNA Assurance for network management802.11ac Wave 1 and 2 capabilities 2x2 MIMO with two spatial streams Multi- and single-user MIMO Maximal-Ratio Combining (MRC)  802.11ac beamforming (transmit beamforming)  20- 40- and 80-MHz channels  PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)  802.11 Dynamic Frequency Selection (DFS)  Cyclic Shift Diversity (CSD) support 802.11n Version 2.0 (and related) capabilities  2x2 MIMO with two spatial streams  Maximal-Ratio Combining (MRC)  20- and 40-MHz channels  PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)  802.11 Dynamic Frequency Selection (DFS)  Cyclic Shift Diversity (CSD) support Data rates supported2.4-GHz radio:802.11b: 1  2  5.5  11 Mbps802.11g: 6  9  12  18  24  36  48  54 Mbps802.11n data rates:Interfaces x1 10/100/1000BASE-T autosensing PoE+ In (802.3at)UPOE in  x2 10/100/1000BASE-T autosensing PoE Out (802.3af) PoE+ out (802.3at)  x1 fiber SFP (fiber or electrical)  Management console port (RJ-45)  USB3.0 port  Multicolor system LED  port LED  DC power input (IW-6300H-DC-X-K9  IW-6300H-DCW-X-K9)  AC power input (IW-6300H-AC-X-K9)  Reset buttonUplink optionsEthernet  SFP  and wireless meshDimensions (W x L x H)IW-6300H-DC-X-K9: 9.7" x 11" x 3.8"IW-6300H-DCW-X-K9: 9.7" x 11" x 5.6"IW-6300H-AC-X-K9: 9.7" x 11" x 5.6"Weight13.3 lbs (IW-6300H-AC-X-K9), 9.8 lbs (IW-6300H-DC-X-K9),12.7 lbs (IW-6300H-DCW-X-K9)Warranty1 yearIW 6300 Series  IW-6300H-DC-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  44-57VDC/POE+/UPOE power input  IW-6300H-DCW-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  10.8-36VDC/POE+/UPOE power input  IW-6300H-AC-X-K9: Dual-band 802.11a/g/n/ac  Wave 2  external antennas  110-220VAC/POE+/UPOE power input

Brand : Cisco SystemsProduct Name : Cisco Business 150AX Wi-Fi 6 2x2 Access Point 1 GbE Port - Ceiling MountProduct Type : Wireless Access PointNetwork Band : Dual BandFrequency Band : 2.40 GHz , 5 GHzAntenna Form Factor : InternalWireless LAN Standard : IEEE 802.11axEthernet Technology : Gigabit EthernetNumber of Network (RJ-45) Ports : 1PoE (RJ-45) Port : YesForm Factor : Ceiling Mountable , Wall MountableDynamic VLAN or per portTraffic locally switched or tunneled back to Primary AP1 GB DRAM, 256 MB flash1GHz quad core processorAC Power Supply with region specific wall plug