Intel Xeon E3 1220 v5 (8M Cache, 3.00 GHz) Processor 8GB or 16GB Memory Microsoft 2016 (Standard Edition and Workgroup Edition) OS Always 4 x 3.5” internal drives that must be identical in capacity and type (NL-SAS or SATA) 40TB raw capacity with 10TB NL SAS internal capacity SATA (7.2K): 1TB, 2TB 4TB, 6TB, 8TB drives NL SAS (7.2K): 1TB, 2TB, 4TB, 6TB, 8TB, 10TB  drives 2 PCIe slots RAID 5 Hot plug hard drives, hot plug power PERC H730 (internal drives) or H830 (optional for external drives) 0, 1, 5, 6 and 10 with the PowerEdge Raid Controller (PERC) H730 CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA) File Access Protocols Leverages shared storage back end for block access Microsoft iSCSI Target 1U rack mount system form factor Redundant, 350W Power 3 Years ProSupport NBD Warranty

Intel Xeon E5 2609 v3 1.9GHz, 15M cache, 85W or Intel Xeon E5 2630 v3 2.4GHz, 20M cache, 85W Processor  Microsoft Windows Storage Server 2016 Standard Edition OS Up to 12 x 3.5” drives for a total of 120TB using 10TB NL-SAS HDDs Drives SATA 7.2K RPM: 2TB, 4TB Drives Types NL-SAS 7.2K RPM: 1TB, 2TB, 4TB, 6TB, 8TB, 10TB Drives Types SAS 10K RPM: 600GB, 1.2TB Drives Types SAS 15K RPM: 600GB Drives Types CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA) File Access Protocols Microsoft iSCSI target Block Access Protocols 2U Rack-Mount System Form Factor Six PCIe 3.0 slots (four with x16 bandwidth and two with x8 bandwidth) Slots PowerVault, PS Series and SC Series controllers and arrays External Expansion Standard options: OS HDDs (on rear 2.5” HDDs) is always RAID1 Data HDDs can be configured from factory in RAID5 or RAID6 (minimum 4 HDDs) The internal PERC can support additional customer configurable RAID options Custom options: As supported by internal PERC H730 (0, 1, 5, 6, 10, 50, 60) Controller: PERC H730 (internal HDDs)  Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling, ECC memory Redundant and non-redundant hot-plug 750W and 1100W PSU options Power 3 Years ProSupport NBD Warranty

Intel Xeon E5 2630 v3 2.4GHz, 20M cache, 85W Processor  Microsoft Windows Storage Server 2016 Standard Edition OS Up to 12 x 3.5” drives for a total of 120TB using 10TB NL-SAS HDDs Drives SATA 7.2K RPM: 2TB, 4TB Drives Types NL-SAS 7.2K RPM: 1TB, 2TB, 4TB, 6TB, 8TB, 10TB Drives Types SAS 10K RPM: 600GB, 1.2TB Drives Types SAS 15K RPM: 600GB Drives Types CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA) File Access Protocols Microsoft iSCSI target Block Access Protocols 2U Rack-Mount System Form Factor Six PCIe 3.0 slots (four with x16 bandwidth and two with x8 bandwidth) Slots PowerVault, PS Series and SC Series controllers and arrays External Expansion Standard options: OS HDDs (on rear 2.5” HDDs) is always RAID1 Data HDDs can be configured from factory in RAID5 or RAID6 (minimum 4 HDDs) The internal PERC can support additional customer configurable RAID options Custom options: As supported by internal PERC H730 (0, 1, 5, 6, 10, 50, 60) Controller: PERC H730 (internal HDDs)  Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling, ECC memory Redundant and non-redundant hot-plug 750W and 1100W PSU options Power 3 Years ProSupport NBD Warranty

PowerVault MD3820f, 16G Fibre Channel, 2U-24 drive Bezel Assembly, MD3820f Hard Drive Blank Filler 2.5 600GB 10K RPM SAS 2.5in Hot-plug Hard Drive Controller, 16GB FC, 2U MD38xxF, 8GB Cache 2X SFP, FC16, 16GB Deskside Power Cord, GType, 230V,2M Power Supply, AC 600W, Redundant Jumper Cord, C13 to C14, 250V, 10A, 2m Multi-Mode Fibre Channel Cable LC-LC 2 Meters ReadyRails II Static Rails for 4-post Racks 3 Years ProSupport NBD Warranty

PowerVault MD3820f, 16G Fibre Channel, 2U-24 drive Bezel Assembly, MD3820f Hard Drive Blank Filler 2.5 1.2TB 10K RPM SAS 2.5in Hot-plug Hard Drive Controller, 16GB FC, 2U MD38xxF, 8GB Cache 2X SFP, FC16, 16GB Deskside Power Cord, GType, 230V,2M Power Supply, AC 600W, Redundant Jumper Cord, C13 to C14, 250V, 10A, 2m Multi-Mode Fibre Channel Cable LC-LC 2 Meters ReadyRails II Static Rails for 4-post Racks 3 Years ProSupport NBD Warranty

PowerVault MD3800f, 16G Fibre Channel, 2U-12 drive Bezel Assembly, MD3800f Hard Drive Blank Filler 3.5  4TB, Near-Line SAS 6Gbps, 3.5-in, 7.2K RPM Hard Drive (Hot-plug) Controller, 16GB FC, 2U MD38xxF, 8GB Cache 2X SFP, FC16, 16GB Deskside Power Cord, GType, 230V,2M  Power Supply, AC 600W, Redundant Jumper Cord, C13 to C14, 250V, 10A, 2m Multi-Mode Fibre Channel Cable LC-LC 2 Meters ReadyRails II Static Rails for 4-post Racks  3 Years ProSupport NBD Warranty

PowerVault MD3820i, 10G iSCSI, 2U-24 drive Bezel Assembly, MD3820i 1.2TB 10K RPM SAS 2.5in Hot-plug Hard Drive Hard Drive Blank Filler 2.5 Controller, 10G iSCSI, 2U MD38xxI, 8G Cache Deskside Power Cord, GType, 230V,2M Power Supply, AC 600W, Redundant Jumper Cord, C13 to C14, 250V, 10A, 2m ReadyRails II Static Rails for 4-post Racks 3 Years ProSupport NBD Warranty

PowerVault MD3800i, 10G iSCSI, 2U-12 drive array Bezel Assembly, MD3800i 4TB, Near-Line SAS 6Gbps, 3.5-in, 7.2K RPM Hard Drive (Hot-plug)  Hard Drive Blank Filler 3.5     Controller, 10G iSCSI, 2U MD38xxI, 8G Cache Deskside Power Cord, GType, 230V,2M Power Supply, AC 600W, Redundant Jumper Cord, C13 to C14, 250V, 10A, 2m ReadyRails II Static Rails for 4-post Racks 3 Years ProSupport NBD Warranty

Operating  :Microsoft Windows Storage Server 2016 (Standard Edition and Workgroup Edition)ChassisWeight (Maximum): 13.2 kg (29.10 lb)Height: 42.8 mm (1.68 in)Width:482.0 mm (18.98 inches with rack ears)Depth:573.6 mm (22.58 in)Chassis Overview1U rack-mountData Protection FeaturesDFS-R (Replication), VSS (Snapshots), Optional TPMHard Drive Configuration4 x 3.5" internal drives that must be identical in capacity and type. OS HDDs from factory in RAID 5. PERC H730P (internal drives).Maximum Usable Capacity48TB raw capacity using 12TB HDDs)ManagementDell OpenManage featuring Dell Management Console, iDRAC9 Enterprise, Native Java RDP plug-in or Windows Server Management interfaceData Management Features: Data deduplication with compression, FCI (File Classification Infrastructure), FSRM (File Server Resource Manager)Data Protection, Disaster Recovery, Security :Hot-plug hard drives, hot-plug power, hot-plug cooling, ECC memoryPower :AC Power/Max Current:  Single or dual hot-plug, redundant and non-redundant 350W PSU optionsRegulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the Environment

Operating System :Microsoft Windows Storage Server 2016 Standard EditionAdditional Features :Cluster support up to 64 nodesChassis :Weight (Maximum): 21.9 kg (48.28 lbs)Height: 42.8 mm (1.68 in)Width : 482.0 mm (18.98 in with rack ears)Depth:705.05 mmChassis Overview :1U rack-mountData Protection Features : DFS-R (Replication), VSS (Snapshots), Optional TPMHard Drive Configuration2 or 4 x 2.5" front accessible for OS. Each platform in a clustered configuration with 2 HDDS for OS (RAID1) or 4 HDDs for OS (RAID5). PERC H730 (internal drives) or H840 (optional for external drives).Maximum Usable Capacity : Leverages shared storage arrays attached via SAS, iSCSI or FCManagement:Dell OpenManage featuring Dell Management Console, iDRAC9 Enterprise, Native Java RDP plug-in or Windows Server Management interfaceData Management Features: Data deduplication with compression, FCI (File Classification Infrastructure), FSRM (File Server Resource Manager)Data Protection, Disaster Recovery, Security:Hot-plug hard drives, hot-plug power, hot-plug cooling, ECC memoryPower : AC Power/Max Current: Redundant and non-redundant hot-plug 750W PSU optionsRegulatory :Product Safety, EMC and Environmental DatasheetsDell Regulatory Compliance Home PageDell and the Environment

Rack size: 3UHeight: 13.33 cm (5.25 inches)Width: 44.5 cm (17.52 inches)Depth: 78.5 cm (30.9 inches)Weight at maximum configuration: 24.22 kg (53.4 lb)Weight empty: 15.15 kg (33.4 lb)Power :Power/wattage: 2 hot-swappable power supplies (1378W or 1485W options available, wattage type not interchangeable after point of sale)Maximum output power: 1378W supply option: 1378 W; 1485W supply option: 1485 W Maximum input power: 1378W supply option: 1584 W; 1485W supply option: 1688 W Maximum input current: 1378W supply option: 16 A, 1485W supply option: 8.8 A Maximum inrush current: 55A for 10 ms or less Nominal input voltage operating range: 1378W supply option: 100 240 VAC; 1485W supply option: 200-240 VAC Nominal input frequency: 50/60 HzMaximum thermal output/heat dissipation: 1378W option: 5,770 BTU per hour; 1485 option: 5,760 BTU per hour (for all-in-one base appliance, no expansion enclosures)

Chassis OverviewChassis formatAll in one (dual controllers, internal drive bays, networking and expansion ports) Rack size : 3UControllers : 2 hot-swappable per chassis (active/active) Processors : Intel Xeon Processor E5-2603v4, 1.7GHz, 6 coresInternal storage capacitySCv3000: 16 x 3.5 drive baysSCv3020: 30 x 2.5 drive baysSystem memory : 32GB per SCv3xxx array (16GB per controller)Operating system : Storage Center OS (SC OS) 7.2 or greaterEnvironmental Operating Conditions :Operating temperature: 50 - 95°F (10 - 35°C)Non-operating temperature: -40 - 149°F (-40 - 65°C)Operating humidity ranges (non-condensing): 10% to 80% with 29°C (84.2°F) maximum dew pointNon-operating humidity (non-condensing): 5% to 95% with 33°C (91°F) maximum dew pointInlet type: NEMA 5-15/CS22.2, n°42Expansion CapacitySupported expansion enclosures :SCv300: 12 x 3.5 drive bays (12Gb SAS)SCv320: 24 x 2.5 drive bays (12Gb SAS)SCv360: 60 x 3.5 drive bays (12Gb SAS)Maximum drive count : 222 per array (internal plus external expansion), more in federated systemsMax raw capacity : 1PB per array (SSD or HDD), more in federated systemsStorage media :SAS and NL-SAS drives; different drive types, transfer rates and rotational speeds can be mixed in the same system.SSD: write-intensive and read intensive drives HDD: 15K, 10K, 7.2K RPMFunctional :Array configurations : All flash, hybrid or HDD arraysStorage format: Block (SAN)Max SAN hosts: 250Max initiator ports: 500Max LUN size 500TBMax number of LUNs: 1000Max number of snapshots: 4096Max IOPS: 665,000 Max IOPS (with latency less than 1ms): 540,000 Max IOPS (80% reads, 20% writes): 231,000 Max throughput (reads): 19,000 MB/s Max throughput (writes): 9,500 MB/sNetwork and Expansion I/OFront-end-network protocols :FC, iSCSI, SAS (supports simultaneous multiprotocol): FC + iSCSI or SAS + iSCSI)Max 16Gb FC ports : 8 per array (SFP+)Max 10Gb iSCSI ports  : 16 SFP+ or BaseT per arrayMax 12Gb SAS ports : Up to 8 12Gb SAS portsManagement ports : 2 per array (1Gb BASE-T) Back end expansion protocols : 12Gb SAS Max back end expansion ports8 per array  : Up to 16 expansion enclosures per arrayPhysicalSCv3000 :Rack size: 3UHeight: 13.33 cm (5.25 inches)Width: 44.5 cm (17.52 inches)Depth: 78.5 cm (30.9 inches)Weight at maximum configuration: 24.22 kg (53.4 lb)Weight empty: 15.15 kg (33.4 lb)

Chassis :Dimensions :Height: 2U/87.3 mm (3.44 inches)Width: 482.4 mm (18.98 inches) with rack latches; 444 mm (17.08 inches) without rack latchesDepth: 755.8 mm (29.75 inches) with bezelWeight: 19.73 kg (43.5 lb) Rack support :ReadyRails II static rails for tool less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racksConnectivity :PCIe Gen 3 slots, 7 per controller, 4 full-height (cache card consumes one), 3 low profile, Any slot may be used for either front-end network or back-end expansion capacity connections Front-end network protocols : FC, iSCSI, FCoE (supports simultaneous multiprotocol) Max 32Gb FC ports : 32 per array (SFP+)Max 16Gb FC ports : 40 per arrayMax 8GbFC ports : 12 per arrayMax 100Gb iSCSI ports :20 QSFP28 per arrayMax 25Gb iSCSI ports : 20 SFP28 per arrayMax 10Gb iSCSI ports : 32 SFP+ or BaseT per array iSCSI DCB IPv6Max 10Gb FCoE ports : 12 per array Back end expansion protocols : 12Gb SAS (auto-negotiates to 6Gb) Max back-end expansion ports : 40 per arrayEnvironmental Operating Conditions :Temperature :Operating: 41º to 104ºF ( 5º to 40ºC )Non-operating: -40º to 149ºF ( -40º to 65ºC )Humidity :Operating: 10% to 80% (non-condensing)Non-operating: 5% to 95% (non-condensing)Product ConfigurationsStorage controller : SC9000 (2U chassis)Controllers per array : 2 (active/active)Operating system : Dell Storage Center 6.7 or greaterProcessor : Dual 3.2GHz, 8-core Intel® processors per controllerMaximum system memory : 256GB per controller (512GB total per array)Power :Power/wattage: 2 hot-swappable 1100W 80 PLUS® Energy Star Platinum-certified power supplies Maximum output power: 1100 W Maximum input power: 1200 W Maximum input current: 12 A Maximum inrush current: 25A for 10 ms or less Nominal input voltage operating range: 100-240 VAC Nominal input frequency: 50/60 HzMaximum thermal output/heat dissipation: 4,760 BTU per hour (per controller) Fans : 6 hot-swappable fan modulesRegulatory :Product Safety, EMC and Environmental Datasheets, Dell Regulatory Compliance Home Page, Dell and the EnvironmentScalability :Min/max drives : 6/1024 per array, more in federated systemsMax raw capacity : 6PB per array (SSD or HDD), more in federated systemsExpansion enclosures :Mix and match from the following options:Dell SC400: 12 x 3.5 drive bays, 12Gb SASDell SC420: 24 x 2.5 drive bays, 12Gb SASDell SC460: 60 x 3.5 drive bays, 12Gb SASDell SC280: 84 x 3.5 drive bays, 6Gb SASDell SC200: 12 x 3.5 drive bays, 6Gb SASDell SC220: 24 x 2.5 drive bays, 6Gb SASStorage : Storage format : Block (SAN)Storage media :SAS and NL SAS drives; different drive types, transfer rates and rotational speeds can be mixed in same system SSD: Write intensive and read intensiveHDD: 15K, 10K, 7.2K RPMFunctional :Max SAN hosts: 500Max initiator ports: 1000Max LUN size: 500TBMax number of LUNs: 2000Max number of snapshots: 32,000Max IOPS: 2,220,000*Max IOPS:(with latency less than 1ms) 2,085,000Max IOPS (80% reads, 20% writes): 502,000Max throughput (reads): 33,000 MB/sMax throughput (writes): 19,000 MB/s

Processor :1 processor from the following product families:Intel® Xeon® processor E3-1200 v6 product familyIntel Pentium®Intel Core i3®Intel Celeron®Operating System Options :Microsoft® Windows Server® 2012 Microsoft Windows Server 2012 R2, x64Microsoft® Windows Server® 2016Red Hat® Enterprise Linux®VMware vSphere® ESXi®SUSE® Linux Enterprise Server®Chipset :Intel C236Memory :4x DDR4 DIMM slots, supports UDIMMs, speeds up to 2666MT/s,64GB max supports registered ECC.Tools :iDRAC Service ModuleOpenManage Server AdministratorOpenManage Storage ServicesDell Repository ManagerDell System UpdateDell Server Update UtilityDell Update CatalogsCommunications :2 X 1GbE LOMSystems management :IPMI 2.0 compliantDell OpenManage EssentialsDell OpenManage MobileDell OpenManage Power CenterSlots :4 PCIe Slots 1x8 Gen3 (x16 connector) FH/HL1x8 Gen3 (x8 connector) FH/HL1x4 Gen3 (x8 connector) FH/HL1x1 Gen3 (x1 connector) FH/HLStorage :3.5” Enterprise SATA 7.2K HDDs3.5” Near Line SAS 7.2K HDDs3.5” 7.2K SATA Entry DrivesPower :Single Cabled 365W PSU

Chassis format :All-in-one (dual controllers, internal drive bays, networking and expansion ports)Rack size :3UControllers :2 hot-swappable per chassis (active/active)Processors :Intel® Xeon® Processor E5-2603v4, 1.7GHz, 6 coresOperating system :Storage Center OS (SC OS) 7.2 or greaterExpansion Capacity :Supported expansion enclosuresSCv300: 12 x 3.5” drive bays (12Gb SAS)SCv320: 24 x 2.5” drive bays (12Gb SAS)SCv360: 60 x 3.5” drive bays (12Gb SAS)*Network and Expansion I/O :FC, iSCSI, SAS (supports simultaneous multiprotocol): FC + iSCSI or SAS + iSCSI)Physical :SCv3000Rack size: 3UHeight: 13.33 cm (5.25 inches)Width: 44.5 cm (17.52 inches)Depth: 78.5 cm (30.9 inches)Weight at maximum configuration: 24.22 kg (53.4 lb)Weight empty: 15.15 kg (33.4 lb)RAID :Supports RAID 0, 1, 5, 6, RAID 10 and RAID 10 DM (dual mirror). Any combination of RAID levels can exist on a single Storage Center. Multiple RAID levels can exist on the same storage tier within an array.

Processor:Dual 2.5GHz 8 core Intel Xeon processors per controllerOperating System :(A)Product OS : Storage Center 7.1 or higher(B)Server OS : Microsoft Windows Server, Oracle Solaris, HP UX, Oracle Linux, IBM AIX, Novell NetWare, SLES, Apple, HPTru64, VMware®, Citrix XenServer, RedHatChassis :Dimensions :Height: 13.33 cm (5.25 inches)Width: 44.5 cm (17.52 inches)Depth: 78.5 cm (30.9 inches)Weight: 24.22 kg (53.4 lb) (maximum configuration), 15.15 kg (33.4 lb) (empty)Rack support : ReadyRails II static rails for tool-less mounting in 4 post racks with square or unthreaded round holes or tooled mounting in 4 post threaded hole racksConnectivity :Back end Connectivity SAS (6Gb ,12Gb)NAS deployment connectivity (optional)Supports file based storage via FS8600 NAS appliance2 controllers per SC7020 array (dual-active controllers)Drive Controllers :Supported expansion enclosuresDell SC400: 12 x 3.5 drive bays, 12Gb SASDell SC420: 24 x 2.5 drive bays, 12Gb SASDell SC460: 60 x 3.5 drive bays, 12Gb SASDell SC280: 84 x 3.5 drive bays, 6Gb SASDell SC200: 12 x 3.5 drive bays, 6Gb SASDell SC220: 24 x 2.5 drive bays, 6Gb SASMaximum drive count : 606 (30 internal, plus 576 external)Supported drive types : HDD: 15K, 10K, 7.2K RPM SSD: write intensive and read-intensive drives in SLC, MLC and TLC formats. Drive types can be mixed in the same systemInternal drive (back-end) : 4 x 12Gb SAS ports per SC7020 array (2 per controller)Memory : 256GB per SC7020 array (128GB per controller)Product Configurations :Internal Storage : 30 x 2.5 Drive BaysControllers  : 2 per SC7020 chassis (active/active)Operating system : Dell Storage Center 7.1 or greaterProcessor : Dual 2.5GHz, 8-core Intel® processors per controllerMaximum system memory : 256GB per controller (512GB total per array)*NAS deployment connectivity (optional) : Supports file-based storage via FS8600 NAS appliancePortsFront-end network protocols  : FC, iSCSI (supports simultaneous multiprotocol) Max 32Gb FC ports : 24 per array (SFP+)Max 16Gb FC ports : 24 per array (SFP+)Max 100Gb iSCSI ports : 16 QSFP28 per arrayMax 25Gb iSCSI ports : 16 SFP28 per arrayMax 10Gb/1Gb iSCSI ports  : 32 SFP+ or BaseT ports per arrayBack-end expansion protocols : 12Gb SAS (auto-negotiates to 6Gb) Max back-end expansion ports : 24 x 12Gb SAS ports per arrayPower :Power/wattage: 2 hot-swappable power suppliesMaximum output power: 1485 W Maximum input power: 1688W Maximum input current: 8.8 A Maximum inrush current: 55A for 10 ms or less Nominal input voltage operating range: 200 240 VAC Nominal input frequency: 50/60 HzMaximum thermal output/heat dissipation: 5,760 BTU per hour (for all-in-one base appliance, no expansion enclosures)RAID :Supports RAID 0, 1, 5, 6, RAID 10 and RAID 10 DM (dual mirror). Any combination of RAID levels can exist on a single Storage Center. Multiple RAID levels can exist on the same storage tier within an arrayScalability :Min/max drives :4/606 per array, more in federated systems (30 internal, plus 470 external)Max raw capacity (SAN)  :  1PB per array (SSD or HDD), more in federated systemsExpansion enclosures  :Mix and match from the following options:Dell SC400: 12 x 3.5 drive bays, 12Gb SASDell SC420: 24 x 2.5 drive bays, 12Gb SASDell SC460: 60 x 3.5 drive bays, 12Gb SASDell SC280: 84 x 3.5 drive bays, 6Gb SASDell SC200: 12 x 3.5 drive bays, 6Gb SASDell SC220: 24 x 2.5 drive bays, 6Gb SASStorage :Storage format : Block (SAN)Storage media  :SAS and NL-SAS drives; different drive types, transfer rates and rotational speeds can be mixed in same system SSD: Write-intensive, read intensive (SLC, MLC and TLC formats)HDD: 15K, 10K, 7.2K RPMFunctional :Max SAN hosts: 500Max initiator ports: 1000Max LUN size 500TBMax number of LUNs: 2000Max number of snapshots: 16,384Max IOPS: 1,200,000 Max IOPS: (with latency less than 1ms) 1,050,000 Max IOPS (80% reads, 20% writes): 346,000Max throughput (reads): 29,000 MB/s Max throughput (writes): 14,000 MB/s

Chassis Overview :Chassis format : All in one (dual controllers, internal drive bays, networking and expansion ports) Rack size : 3UControllers : 2 hot swappable per chassis (active/active) Processors : Intel Xeon Processor E5 2630 v3, 2.4GHz, 8 coresInternal storage capacity : 30 x 2.5 drive baysSystem memory : 128GB per SC5020 array (64GB per controller)Operating system : Dell Storage Center OS (SC OS) 7.2 or greaterEnvironmental Operating Conditions :Operating temperature: 50 95°F (10 - 35°C)Non-operating temperature: -40 - 149°F (-40 - 65°C)Operating humidity ranges (non-condensing): 10% to 80% with 29°C (84.2°F) maximum dew pointNon-operating humidity (non-condensing): 5% to 95% with 33°C (91°F) maximum dew pointInlet type: NEMA 5-15/CS22.2, n°42Expansion CapacitySupported expansion enclosuresDell EMC SC420: 24 x 2.5 drive bays (12Gb SAS)Dell EMC SC400: 12 x 3.5 drive bays (12Gb SAS)Dell EMC SC460: 60 x 3.5 drive bays (12Gb SAS)Maximum drive count : 222 per array (30 internal, plus 192 external), more in federated systemsMax raw capacity : 2.16 PB per array (SSD or HDD), more in federated systemsMax raw capacity (NAS) :2.16 PB per array (requires FS8600 NAS appliance)4PB in single namespace (requires FS8600 and multiple arrays) 20PB with global namespace (requires FS8600 and multiple arrays) Storage media :SAS and NL-SAS drives; different drive types, transfer rates and rotational speeds can be mixed in the same system. SSD: write-intensive and read-intensive drives HDD: 15K, 10K, 7.2K RPMFunctionalArray configurations :All-flash, hybrid or HDD arraysStorage format : Block (SAN)Max SAN hosts: 500Max initiator ports: 1000Max LUN size: 500TBMax number of LUNs: 2000Max number of snapshots: 8192Max IOPS: 1,025,000 Max IOPS (with latency less than 1ms): 818,000Max IOPS (80% reads, 20% writes): 330,000 Max throughput (reads): 19,000 MB/s Max throughput (writes): 9,500 MB/sNetwork and Expansion I/OFront-end-network protocolsFC, iSCSI, SAS (supports simultaneous multiprotocol)Max 32Gb FC ports : 8 per array (SFP+)Max 16Gb FC ports : 8 per array (SFP+)Max 100Gb iSCSI ports : 8 QSFP28 per arrayMax 25Gb iSCSI ports : 8 SFP28 per arrayMax 10Gb iSCSI ports : 16 SFP+ or BaseT per arrayMax 12Gb SAS ports : 8 12Gb SAS ports* Management ports : 2 per array (1Gb BASE-T) Back-end expansion protocols : 12Gb SAS Max back-end expansion ports :8 per array  : Up to 16 expansion enclosures per arrayPhysical :Rack size: 3UHeight: 13.33 cm (5.25 inches)Width: 44.5 cm (17.52 inches)Depth: 78.5 cm (30.9 inches)Weight at maximum configuration: 24.22 kg (53.4 lb)Weight empty: 15.15 kg (33.4 lb)Power :Power/wattage: 2 hot-swappable power supplies (1378W or 1485W options available, wattage type not interchangeable after point of sale)Maximum output power: 1378W supply option: 1378 W; 1485W supply option: 1485 W Maximum input power: 1378W supply option: 1584 W; 1485W supply option: 1688 W Maximum input current: 1378W supply option: 16 A, 1485W supply option: 8.8 A Maximum inrush current: 55A for 10 ms or less Nominal input voltage operating range: 1378W supply option: 100-240 VAC; 1485W supply option: 200-240 VAC Nominal input frequency: 50/60 HzMaximum thermal output/heat dissipation: 1378W option: 5,770 BTU per hour; 1485 option: 5,760 BTU per hour (for all-in-one base appliance, no expansion enclosures)

Storage:5 x 12TB 7.2K RPM NLSAS,2 x 600GB SAS (Operating System)Up to 12x3.5" HDDs in front bay, 4x3.5" HDDs in mid bay and 2x3.5” HDDs in rear bay (2.5” OS HDDs in carrier)Max internal capacity:192TB raw capacity (with 12TB NL-SAS)Memorry:8GB x 2; Upto 64GBTypes of data:File and Block (Microsoft iSCSI target)Drive capacities:SATA (7.2K): 2TB, 4TB NL-SAS (7.2K): 4TB, 8TB, 8TB FIPS, 10TB, 12TB SAS (10K): 600GB, 1.2TB, 1.2TB FIPs, 1.8TB,SAS (15K): 600GBExternal expansion:Not preconfigured for external expansion. To enable expansion add supported SAS HBA or PERC H840 card and attach MD1400/MD1420 expansion modulesForm factor:2U rack-mount system,Single and DualProcessors:Intel® Xeon® Bronze 3104, 1.7G, 6C/6T, 8M CacheFile access protocols:CIFS, NFS, FTP, SMB3.0, SMB,Direct (RDMA)Block access protocols:Microsoft iSCSI targetOperating system:Microsoft Windows Storage Server 2016 Standard EditionInternal RAID options:PERC H730P (internal drives)Standard options: OS HDDs (on rear 2.5” HDDs) is always RAID1. Data HDDs can be configured from factory in RAID5 or RAID6 (minimum 4 HDDs)External RAID:PERC H840 (optional)AC Power/Mac Current:Redundant hot-plug 750WBezel:LCD Bezel with Quick Sync 2 (at-the-box management)Dimensions:Height: 86.8mm (3.42”),Width: 482.0mm (18.98”, with rack ears) Maximum Depth: 715.5mm,Maximum weight: 28.1 kg (61.95 lbs)Cluster support:Not recommendedSlots:Four PCIe 3.0 slots (four with x8 bandwidth)Management:Dell OpenManage™ Essentials, iDRAC9 EnterpriseData protection features:Replication (DFS-R), Snapshots (VSS),Optional TPM 1.2/2.0