Operating System: Refer to the PERC RAID Card details for supported Operating Systems PERC H810
Back-Panel Connectors :
(A)SAS connectors (per EMM):
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure
(B) Serial connector (per EMM):
1 6-pin UART mini-DIN connector (for factory use only)
Chassis
Height: 8.7cm (3.43 inches)
Width: 48.2cm (18.98 inches)
Depth: 54.1 (21.30 inches)
Weight: 23.31 kg (51 lb) (maximum configuration)
8.61 kg (19 lb) (empty)
Connectivity :
Support for the following configurations:
(A)Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H810 (4 enclosures per port, single path)
(B)Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H810 (4 enclosures connected to both ports via redundant path cabling)
(C)Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 11 and a separate connectivity to drives 12 through 23
Environmental Operating Conditions :
(A)Temperature
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
Supports Fresh Air cooling, up to 35 degrees Celsius
(B)Relative humidity
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)
(C)Altitude
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
LED Indicators :
(A)Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode
(B)Hard-drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive
(C)EMM
3 two-color LED status indicators: one for each of the EMM SAS ports and one for the EMM status
1 single-color Unit Identification LED for each EMM
(D)Power supply/cooling fan module
3 LED status indicators for Power supply/cooling fan fault, AC power, and DC power
